Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
utilisateurs:hector [Le 10/04/2015, 22:43]
hector [administration ✔]
utilisateurs:hector [Le 10/04/2015, 22:56] (Version actuelle)
hector [administration ✔]
Ligne 1: Ligne 1:
- 
-====== Hector ====== 
- 
-J'ai découvert les logiciels libres par mozilla, puis firefox, puis thunderbird,​ puis openoffice , et enfin GNU/linux ! ;-) 
- 
-Je m'​intéresse particulièrement aux documents libres, liées aux langues (dictionnaires,​ etc...) : je participe (avec d'​autres membres du forum, [[utilisateurs:​sorbus|sorbus]] et [[utilisateurs:​alteo_gange|alteo_gange]]) au wiki [[http://​polyglotte.tuxfamily.org/​doku.php|polyglotte]] visant à promouvoir et améliorer les outils libres d'​apprentissage des langues. ​ 
- 
-Je m'​intéresse aussi aux logiciels libres mathématiques. 
- 
-Mes contributions (parfois très mineures !) au wiki d'​ubuntu-fr ont lieu principalement dans les pages : 
-  * [[:​stardict]] 
-  * [[:​dictionnaires_encyclopedies]] 
-  * [[:​logiciels_pour_le_lycee]] 
-  * [[:scilab]] 
-  * [[:R]] 
-  * [[:​Tesseract-ocr]] 
-  * [[:ocr]] 
-  * [[:latex]] 
-  * [[:​ooolatex]] 
- 
-===== Mon réseau ===== 
- ==== Couche physique ​ ==== 
-Type d'​ethernet & vitesse : 
- 
-  * lspci | grep Ethernet 
-  * serveur : nuttcp -S 
-  * client ​    : nuttcp -T20 -i1 IP 
- 
- ==== pratiques ​ ==== 
-transferts de (gros) fichier (réseau local) ==> netcat 
-   * serveur : cat totot.txt | pv -b | nc -l 1337 
-   * client : nc 192.168.0.1 1337| pv -b  > test3.txt 
- 
-=====Mon serveur===== 
-====Machine ✔==== 
- 
-  * boîtier lian li 
-  * carte mère atom 
-  * DD 
-  * OS : ubuntu 12.04 
- 
-diminuer les ventilo ? 
- 
- 
 ====administration ✔==== ====administration ✔====
   groupadd g1,​g2,​g3,​admin   groupadd g1,​g2,​g3,​admin
Ligne 78: Ligne 34:
   iptables   iptables
   ​   ​
- +  ​utilsateurs existants :
-__  ​utilsateurs existants :__+
 '' ​ grep bash /etc/passwd | cut -f1 -d:''​ '' ​ grep bash /etc/passwd | cut -f1 -d:''​
   ​   ​
- ==== Serveur d'​impression ✔==== 
-  * cups : https://​help.ubuntu.com/​11.10/​serverguide/​cups.html 
- 
- ==== Serveur http ✘==== 
- 
-(pas fait) 
- 
-sudo apt-get install apache2 
-(  sudo service apache2 restart ​ ) 
-http.conf 
-mkdir /​var/​www/​local 
-mkdir /​var/​www/​internet1 
-mkdir /​var/​www/​internet2 
-vim /​etc/​apache2/​sites-available/​local 
- 
- 
- 
- ==== Serveur courriel ​ ✘==== 
-Fichier : 
-  * /​etc/​mailname ​ : domaine.info 
- 
- === mutt  === 
-[[https://​wiki.archlinux.org/​index.php/​mutt#​Maildir]] : spécifier où on lit les courriels et le format (doit être cohérent avec le fichier /​etc/​postfix/​main.cf ). 
-fichier .muttrc pour chaque utilisateur 
-''​set mbox_type=Maildir 
-set folder=$HOME/​Maildir 
-set spoolfile=+/​ 
-set header_cache=~/​.cache/​mutt''​ 
- 
- === postfix ​ === 
-  * sudo apt-get install postfix 
-  * sudo service postfix restart 
-  * /​etc/​postfix/​main.cf [[http://​www.isalo.org/​wiki.debian-fr/​Configuration_d%27un_serveur_mail_avec_Postfix]] 
- 
-''#​ See /​usr/​share/​postfix/​main.cf.dist for a commented, more complete version 
- 
- 
-# Debian specific: ​ Specifying a file name will cause the first 
-# line of that file to be used as the name.  The Debian default 
-# is /​etc/​mailname. 
-myorigin = /​etc/​mailname 
- 
-smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) 
-biff = no 
- 
-# appending .domain is the MUA's job. 
-append_dot_mydomain = no 
- 
-# Uncomment the next line to generate "​delayed mail" warnings 
-#​delay_warning_time = 4h 
- 
-readme_directory = no 
- 
-# TLS parameters 
-smtpd_tls_cert_file=/​etc/​ssl/​certs/​ssl-cert-snakeoil.pem 
-smtpd_tls_key_file=/​etc/​ssl/​private/​ssl-cert-snakeoil.key 
-smtpd_use_tls=yes 
-smtpd_tls_session_cache_database = btree:​${data_directory}/​smtpd_scache 
-smtp_tls_session_cache_database = btree:​${data_directory}/​smtp_scache 
-smtp_generic_maps = hash:/​etc/​postfix/​generic 
-# See /​usr/​share/​doc/​postfix/​TLS_README.gz in the postfix-doc package for 
-# information on enabling SSL in the smtp client. 
- 
-myhostname = L*B***N*** 
-alias_maps = hash:/​etc/​aliases 
-alias_database = hash:/​etc/​aliases 
-mydestination =  L*B***N***, localhost.localdomain,​ localhost, domaine.info,​ smtp.domaine.info, ​ L*B***N***.domaine.local 
-relayhost = 
-mynetworks = # 127.0.0.0/​8,​ 192.168.0.0/​24 
-mailbox_size_limit = 0 
-recipient_delimiter = + 
-inet_interfaces = all 
-inet_protocols = all 
- 
-home_mailbox = Maildir/ 
-''​ 
- === exim  === 
-exim & postfix sont 2 concurrents. 
-exim4 (MTA/MDA) + lecteur (mail, mutt, ...) 
- 
-sudo apt-get install exim4-base exim4-daemon-light 
-sudo dpkg-reconfigure exim4-config 
-  * distrib directe par SMTP 
-  * Nom de courriel du système : gugusse.info 
-  * Liste d'​adresses IP où Exim sera en attente de connexions SMTP entrantes : 127.0.0.1 
-  * Autres destinations dont le courriel doit être accepté : gugusse.info 
-  * Domaines à relayer : vide 
-  * Machines à relayer : vide 
-  * Faut-il minimiser les requêtes DNS (connexions à la demande) ? non 
-  * Méthode de distribution du courrier local : Format « mbox » dans /var/mail 
-  * Faut-il séparer la configuration dans plusieurs fichiers ? oui 
- 
-=== config DNS ===  
-www.ovh.com,​ http://​guides.ovh.com/​VotreServeurMail 
- 
-$TTL 86400 
-''​@ IN SOA dns11.ovh.net. tech.ovh.net. (2014042310 86400 3600 3600000 86400) 
-            IN NS     ​dns11.ovh.net. 
-            IN NS     ​ns11.ovh.net. 
-            IN MX 1   ​smtp.domaine.info. 
-        600 IN TXT    "​v=spf1 a mx ptr ~all" 
-LBN         IN A      83.17.151.23 
-smtp        IN A      83.17.151.23 
-www         IN CNAME  domaine.info.''​ 
- 
-=== config routeur ===  
-Ouvrir le port 25 (smtp), et ? 
-=== bilan (postfix) === 
-| trajet ​           | Envoi   ​|Réception | Résolution | 
-| machine ​      | ✔         | ✔            |                     | 
-| réseau local |             ​| ​              | DNS local    | 
-| internet ​       |  ✔        |  ✔            | DNS ovh     | 
- 
-logs : cat /​var/​log/​mail.log ​ 
- 
- ==== Serveur IMAP  ✔ ==== 
-dovecat 
-/​etc/​dovecot/​dovecot.conf : 
-''​passdb { 
-  driver = pam 
-} 
-protocols = " imap" 
-ssl_cert = </​etc/​ssl/​certs/​dovecot.pem 
-ssl_key = </​etc/​ssl/​private/​dovecot.pem 
-userdb { 
-  driver = passwd 
-} 
-mail_location = maildir:​~/​Maildir''​ 
- 
- ==== Serveur DHCP  ✘ ==== 
- 
- ==== Serveurs P2P  ✔==== 
-=== amule ✔=== 
-amulecmd 
-  * http://​doc.ubuntu-fr.org/​amule#​faire_tourner_amule_en_arriere_planamuled 
-  * http://​solver.io/​wp/​2012/​02/​17/​amulecmd-amule-on-the-command-line/​ 
-  * http://​manpages.ubuntu.com/​manpages/​precise/​fr/​man1/​amulecmd.1.html 
- 
- 
-  * service amule-daemon restart 
-  * amulecmd : 
-     * search kad <​xxxxx>​ 
-     * results 
-     * download <num> 
-     * show dl 
-     * cancel 
- 
-routeur : ouvrir 3 ports (2 tcp, 1 udp) , correspondant à ceux mis dans amule.conf 
- 
-ed2k : 
-  * add ed2k:/ / | serverlist| http://​www.gruk.org/​server.met.gz |/ (sans blanc) 
-  * search 
-  * results 
-  * download 
- 
- 
-=== bittorrent ✔ === 
-  * deluged 
-  * deluge-console 
- 
- ==== Serveur DNS ✔ ==== 
-Pour le réseau local. 
-[[bind9]] 
-  * sudo service bind9 restart 
-  * tuto config réseau local : [[http://​www.agenux.org/​0.agenux.org/​Members/​tapriuneclak/​configuration-de-bind-pour-un-reseau-local.html]] 
-  * répertoire clé : /​etc/​bind ​ 
-  * fichier des résolutions : /​etc/​bind/​domaine.local 
-    * /​etc/​resolv.conf chez les clients: pointer sur le serveur DNS (!), ajouter un "​search domaine.local"​ 
-<note important>​sudo apt-get remove libnss-mdns sur les machines du réseau local [[http://​askubuntu.com/​questions/​81797/​nslookup-finds-ip-but-ping-doesnt]]</​note> ​ 
- 
-==== Serveur SSH ✔ ==== 
-===== LIRC ✘===== 
-==== Ma config lirc ==== 
-Ayant galéré pendant des années à essayer de configurer ma télécommande avec [[lirc]], je note aussi ma config qui marche , matérielle,​ logicielle et config : 
-(cf aussi la  page de [[utilisateurs:​quent57/​lirc|quent57]] et cette page [[http://​mythtv-fr.tuxfamily.org/​wiki/​lirc]]) 
-Note : depuis le noyau 2.36, rebelote , ça ne marche plus. il faut utiliser lirc.0.9 semble t'il. cf http://​www.lirc.org/​faq.html 
-=== matériel === 
-télécommande vendue avec carté télé Pinnacle PCTV pro  
-port série 
- 
-=== versions === 
-==06/2012== 
-<​code>​hector@LaGrosseBete:​~$ uname -a 
-Linux LaGrosseBete 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 
-hector@LaGrosseBete:​~$ lsmod|grep lirc 
-ir_lirc_codec ​         12859  0  
-lirc_dev ​              ​19204 ​ 1 ir_lirc_codec 
-rc_core ​               26412  8 ir_lirc_codec,​ir_mce_kbd_decoder,​ir_sony_decoder,​ir_jvc_decoder,​ir_rc6_decoder,​ir_rc5_decoder,​ir_nec_decoder,​bttv 
-</​code>​ 
-après :sudo apt-get install lirc 
-<​code>​hector@LaGrosseBete:​~$ ​ lsmod|grep lirc 
-lirc_serial ​           19227  0  
-ir_lirc_codec ​         12859  0  
-lirc_dev ​              ​19204 ​ 2 lirc_serial,​ir_lirc_codec 
-rc_core ​               26412  8 ir_lirc_codec,​ir_mce_kbd_decoder,​ir_sony_decoder,​ir_jvc_decoder,​ir_rc6_decoder,​ir_rc5_decoder,​ir_nec_decoder,​bttv 
-</​code>​ 
-==précédentes tentatives== 
-<​code>​hector@LaGrosseBete:​~$ uname -a 
-Linux LaGrosseBete 3.0.0-13-generic #21-Ubuntu SMP Mon Oct 17 20:18:51 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux 
-hector@LaGrosseBete:​~$ lsmod|grep lirc 
-ir_lirc_codec ​         12898  0  
-lirc_dev ​              ​19204 ​ 1 ir_lirc_codec 
-rc_core ​               26963  7 ir_lirc_codec,​ir_sony_decoder,​ir_jvc_decoder,​ir_rc6_decoder,​ir_rc5_decoder,​ir_nec_decoder,​bttv 
-</​code>​ 
-=== lancement === 
-<​code>​ 
-hector@LaGrosseBete:​~$ sudo service lirc start 
-* Starting remote control daemon(s) : LIRC                              [ OK ]  
-</​code><​code>​ 
-hector@LaGrosseBete:​~$ ps auxf |grep lirc 
-hector ​  ​16131 ​ 0.0  0.0  15816   896 pts/2    S+   ​10:​12 ​  ​0:​00 ​     |           ​| ​  \_ grep lirc 
-root     ​16119 ​ 0.0  0.0  32304   680 ?        Ss   ​10:​11 ​  0:00 /​usr/​sbin/​lircd --output=/​var/​run/​lirc/​lircd --driver=pinsys --listen 
-root     ​16125 ​ 0.0  0.0  34404   940 ?        Ss   ​10:​11 ​  0:00 /​usr/​sbin/​lircd --output=/​var/​run/​lirc/​lircd1 --driver=pinsys --device=/​dev/​lirc0 --connect=localhost 8765 --pidfile=/​var/​run/​lirc/​lircd1.pid 
-</​code>​ 
- 
- 
- 
- 
- 
-==== vieilles info ==== 
- 
-=== matériel === 
-télécommande vendue avec carté télé Pinnacle PCTV pro  
-port série 
- 
-=== versions === 
- 
-<​code>​hector@hector:​~$ uname -a 
-Linux LaGrosseBete 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux 
-hector@hector:​~$ lsmod |grep lirc 
-lirc_dev ​              ​12140 ​ 0 
-</​code>​ 
- 
-2011 : 
-<​code>​hector@LaGrosseBete:​~$ uname -a 
-Linux LaGrosseBete 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:17:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux 
-hector@LaGrosseBete:​~$ lsmod |grep lirc 
-ir_lirc_codec ​         12898  0  
-lirc_dev ​              ​19232 ​ 1 ir_lirc_codec 
-rc_core ​               26918  7 bttv,​ir_lirc_codec,​ir_sony_decoder,​ir_jvc_decoder,​ir_rc6_decoder,​ir_rc5_decoder,​ir_nec_decoder</​code>​ 
- 
-=== lancement === 
- 
-<​code>​ 
-sudo lircd --driver=pinsys --nodaemon 
-irexec -d 
-irxevent -d 
-</​code>​ 
-<​code>​ 
-hector@hector:​~$ ps auxf |grep lirc 
-root      1502  0.0  0.0  26728   624 ?        Ss   ​10:​27 ​  0:00 /​usr/​sbin/​lircd --output=/​var/​run/​lirc/​lircd --driver=pinsys --listen 
-root      1510  0.0  0.0  28828   912 ?        Ss   ​10:​27 ​  0:00 /​usr/​sbin/​lircd --output=/​var/​run/​lirc/​lircd1 --driver=pinsys --device=/​dev/​lirc0 --connect=localhost 8765 --pidfile=/​var/​run/​lirc/​lircd1.pid 
-hector ​   5117  0.0  0.0   ​8980 ​  876 pts/0    S+   ​23:​46 ​  ​0:​00 ​     \_ grep lirc 
-</​code>​ 
- 
- 
-===   ​fichiers de config ​ === 
- 
-<​code>​hector@hector:​~$ cat /​etc/​lirc/​lircd.conf 
-# 
-# contributed by Bart Alewijnse <​scarfboy@yahoo.com>​ 
-# 
-# brand: ​            ​Pinnacle Systems 
-# model: ​            PCTV Remote (Perhaps other ones as well) 
-# supported devices: there'​s only one I know of. (serial) ​ 
-# 
-# Mail me if your remote is only partly supported, or if it has different 
-# buttons than listed below. 
-# 
- 
-begin remote 
- 
-  name  PinnacleSysPCTVRemote 
-  bits              16 
-  eps               30 
-  aeps             100 
- 
-  one                0     0 
-  zero               ​0 ​    0 
-  pre_data_bits ​     8 
-  pre_data ​       0xFE 
-  gap           ​180000 
-  toggle_bit ​        0 
- 
-  begin codes 
-          Mute                     ​0xB53C ​                    #​Mute ​                    ​0x000000000000003C 
-          Power                    0x2D2F ​                    #​Power ​                   0x000000000000002F 
-          Chan+Play ​               0x173F ​                    #​Chan+Play ​               0x000000000000003F 
-          Chan-Stop ​               0xC63E ​                    #​Chan-Stop ​               0x000000000000003E 
-          Vol+FF ​                  ​0xF13B ​                    #​Vol+FF ​                  ​0x000000000000003B 
-          Vol-Rew ​                 0x643D ​                    #​Vol-Rew ​                 0x000000000000003D 
-          1                        0x9F31 ​                    #​1 ​                       0x0000000000000031 
-          2                        0x3D32 ​                    #​2 ​                       0x0000000000000032 
-          3                        0xEC33 ​                    #​3 ​                       0x0000000000000033 
-          4                        0xA834 ​                    #​4 ​                       0x0000000000000034 
-          5                        0x7935 ​                    #​5 ​                       0x0000000000000035 
-          6                        0xDB36 ​                    #​6 ​                       0x0000000000000036 
-          7                        0x0A37 ​                    #​7 ​                       0x0000000000000037 
-          8                        0x5338 ​                    #​8 ​                       0x0000000000000038 
-          9                        0x8239 ​                    #​9 ​                       0x0000000000000039 
-          Fullscreen ​              ​0x5E2D ​                    #​Fullscreen ​              ​0x000000000000002D 
-          0/AV                     ​0x203A ​                    #​0/​AV ​                    ​0x000000000000003A 
-          Info                     ​0xCB2B ​                    #​Info ​                    ​0x000000000000002B 
-          Preview ​                 0xFC2E ​                    #​Preview ​                 0x000000000000002E 
-          Record ​                  ​0x3027 ​                    #​Record ​                  ​0x0000000000000027 
-          Chan_Last ​               0x4325 ​                    #​Chan_Last ​               0x0000000000000025 
-          F_TV                     ​0xE126 ​                    #​F_TV ​                    ​0x0000000000000026 
-          F_TELETEXT ​              ​0xB829 ​                    #​F_TELETEXT ​              ​0x0000000000000029 
-          F_RADIO ​                 0x1A2A ​                    #​F_RADIO ​                 0x000000000000002A 
- 
-# 
-# here are some extra buttons a new version of the remote seems to have 
-# 
-# contributed by Robbert Monna <​rjmonna@kabelfoon.nl>​ 
-# 
-# brand: ​            ​Pinnacle Systems 
-# model: ​            PCTV Remote (newest version?) 
-# supported devices: dongle on serial port (from TV-Card) 
-# 
-          L                        0x631F ​                    #​L ​                       0x000000000000001F 
-          Zoom                     ​0xB21E ​                    #​Zoom ​                    ​0x000000000000001E 
-          vol+                     ​0x851B ​                    #​vol+ ​                    ​0x000000000000001B 
-          vol-                     ​0x590F ​                    #​vol- ​                    ​0x000000000000000F 
-          channel+ ​                ​0x7E17 ​                    #​channel+ ​                ​0x0000000000000017 
-          channel- ​                ​0xC11C ​                    #​channel- ​                ​0x000000000000001C 
-          middle ​                  ​0x541A ​                    #​middle ​                  ​0x000000000000001A 
-          Menu                     ​0x101D ​                    #​Menu ​                    ​0x000000000000001D 
-          next                     ​0xF619 ​                    #​next ​                    ​0x0000000000000019 
-          undo                     ​0xAF16 ​                    #​undo ​                    ​0x0000000000000016 
-          pause                    0x0D15 ​                    #​pause ​                   0x0000000000000015 
-          redo                     ​0x9813 ​                    #​redo ​                    ​0x0000000000000013 
-          Rewind ​                  ​0x880E ​                    #​Rewind ​                  ​0x000000000000000E 
-          Play                     ​0x2A0D ​                    #​Play ​                    ​0x000000000000000D 
-          Stop                     ​0xBF0B ​                    #​Stop ​                    ​0x000000000000000B 
-          FForward ​                ​0x4407 ​                    #​FForward ​                ​0x0000000000000007 
-          EPG                      0x2718 ​                    #​EPG ​                     0x0000000000000018 
-  
-# here are some more buttons that seem to be mapped differently from 
-# the ones above  
-  
-# contributed by InterCeptor ceptor_7@freemail.hu 
-# 
-# brand: ​  ​Pinnacle Systems PCTV Pro Remote 
-# model no. of remote control: (I can't find any numbers on it) 
-# supported devices: serial 
-# 
- 
-          9                        0x0000000000000082 
-          Zoom                     ​0x00000000000000B2 
-          middle ​                  ​0x0000000000000014 
- 
- 
-  end codes 
-end remote 
-</​code>​ 
-<​code>​ 
-hector@hector:​~$ cat /​etc/​lirc/​hardware.conf 
-# /​etc/​lirc/​hardware.conf 
-# 
-#Chosen Remote Control 
-REMOTE="​Pinnacle Systems PCTV (pro) receiver"​ 
-REMOTE_MODULES=""​ 
-REMOTE_DRIVER="​pinsys"​ 
-REMOTE_DEVICE=""​ 
-REMOTE_SOCKET=""​ 
-REMOTE_LIRCD_CONF="​pinnacle_systems/​lircd.conf.pctv"​ 
-REMOTE_LIRCD_ARGS=""​ 
- 
-#Chosen IR Transmitter 
-TRANSMITTER="​Serial Port (UART) : Direct TV Receiver"​ 
-TRANSMITTER_MODULES="​lirc_dev lirc_serial"​ 
-TRANSMITTER_DRIVER="​pinsys"​ 
-TRANSMITTER_DEVICE="/​dev/​lirc0"​ 
-TRANSMITTER_SOCKET=""​ 
-TRANSMITTER_LIRCD_CONF="​directtv/​general.conf"​ 
-TRANSMITTER_LIRCD_ARGS=""​ 
- 
-#Enable lircd 
-START_LIRCD="​true"​ 
- 
-#Don't start lircmd even if there seems to be a good config file 
-#​START_LIRCMD="​false"​ 
- 
-#Try to load appropriate kernel modules 
-LOAD_MODULES="​false"​ 
- 
-# Default configuration files for your hardware if any 
-LIRCMD_CONF=""​ 
- 
-#Forcing noninteractive reconfiguration 
-#If lirc is to be reconfigured by an external application 
-#that doesn'​t have a debconf frontend available, the noninteractive 
-#frontend can be invoked and set to parse REMOTE and TRANSMITTER 
-#It will then populate all other variables without any user input 
-#If you would like to configure lirc via standard methods, be sure 
-#to leave this set to "​false"​ 
-FORCE_NONINTERACTIVE_RECONFIGURATION="​false"​ 
-START_LIRCMD=""​ 
- 
-</​code>​ 
- 
-<​code>​ 
-hector@LaGrosseBete:​~$ cat .lircrc 
-# lircrc : fichier de configuration de lirc 
-# dernière modif : 26/10/2010 
-# conçu pour les logiciels: 
-# nativement : vlc 
-# irxevent :  dico de VLC, gthumb 
-# irexec : lancement de tvtime 
- 
-### lancement des programmes (irexec) #######################​ 
-begin 
-        prog = irexec 
-        button = F_RADIO 
-        config = /​usr/​bin/​audacious 
-        mode = xmms 
-end 
- 
-begin 
-        prog = irexec 
-        button = F_TV 
-        config = vlc v4l2:///​dev/​video0 --v4l2-standard 255 --v4l2-input 2 
-        repeat = 0 
-        flags= once 
-end 
- 
-begin 
-        prog = irexec 
-        button = F_TELETEXT 
-        config = vlc 
-        flags= once 
-end 
- 
-#####Volume du son ########################​ 
-begin 
-        prog = irexec 
-        button = vol+ 
-        config = aumix -v +10 
-        flags= once 
-end 
- 
-begin 
-        prog = irexec 
-        button = vol- 
-        config = aumix -v -10 
-        flags= once 
-end 
-########################################​ 
- 
- 
-## vlc ####################​ 
-begin vlc 
-begin 
-  prog = vlc 
-  button = Play 
-  config = key-play-pause 
-end 
-begin 
-  prog = vlc 
-  button = pause 
-  config = key-play-pause 
-end 
-begin 
-  prog = vlc 
-  button = Stop 
-  config = key-stop 
-end 
-begin 
-  prog = vlc 
-  button = Power 
-  config = key-quit 
-end 
-begin 
-  prog = vlc 
-  button = Fullscreen 
-  config = key-fullscreen 
-end 
-#begin 
-#  prog = vlc 
-#  button = Vol-Rew 
-#  config = key-vol-down 
-#end 
-#begin 
-#  prog = vlc 
-#  button = Vol+FF ​ 
-#  config = key-vol-up 
-#end 
-begin 
-  prog = vlc 
-  button = Mute 
-  config = key-vol-mute 
-end 
-begin 
-  prog = vlc 
-  button = Chan-Stop 
-  config = key-vol-down 
-end 
-begin 
-  prog = vlc 
-  button = Chan+Play 
-  config = key-vol-up 
-end 
-begin 
-  prog = vlc 
-  button = middle 
-  config = key-nav-activate 
-end 
-begin 
-  prog = vlc 
-  button = L 
-  config = key-subtitle-track 
-end 
-begin 
-  prog = vlc 
-  button = P 
-  config = key-audio-track 
-end 
-begin 
-  prog = vlc 
-  button = redo 
-  config = key-jump+extrashort 
-end 
- 
-begin 
-  prog = vlc 
-  button = undo 
-  config = key-jump-extrashort 
-end 
-begin 
-  prog = vlc 
-  button = FForward 
-  config = key-jump+short 
-end 
- 
-begin 
-  prog = vlc 
-  button = REWIND 
-  config = key-jump-short 
-end 
- 
-begin 
-  prog = vlc 
-  button = Record 
-  config = key-snapshot 
-end 
- 
-end vlc 
-###fin vlc ######################################​ 
- 
- 
-###irxevent daemon is needed for this section 
- 
-begin 
-        prog = irxevent 
-        button = Vol+FF ​ 
-        config = Key Right CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = Vol-Rew 
-        config = Key Left CurrentWindow 
-end 
- 
- 
-begin 
-        prog = irxevent 
-        button = channel+ 
-        config = Key Up CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = channel- 
-        config = Key Down CurrentWindow 
-end 
- 
- 
- 
- 
-## audacious ######################################​ 
-begin audacious 
- 
-    begin 
- prog   = audacious 
- button = Power 
- config = QUIT 
-    end 
- 
-    begin 
- prog   = audacious 
-        button = Play 
- config = PLAYPAUSE 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Pause 
- config = PAUSE 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Stop 
- config = STOP 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Previous 
- config = PREV 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Next 
- config = NEXT 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Vol+ 
- config = VOL_UP 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Vol- 
- config = VOL_DOWN 
-    end 
- 
-    begin 
- prog   = audacious 
- button = Mute 
- config = MUTE 
-    end 
- 
-end audacious 
- 
-########################################​ 
- 
-</​code>​ 
- 
- 
  • utilisateurs/hector.txt
  • Dernière modification: Le 10/04/2015, 22:56
  • par hector