Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente | ||
aticonfig [Le 14/10/2014, 11:04] cafecho orthographe+corrections mineures |
— (Version actuelle) | ||
---|---|---|---|
Ligne 1: | Ligne 1: | ||
- | {{tag>matériel carte_graphique amd-ati catalyst}} | ||
- | ---- | ||
- | ====== Aticonfig: les options pour bien configurer votre carte graphique AMD-ATI ====== | ||
- | |||
- | **aticonfig** est la commande qui permet de paramétrer le pilote propriétaire de votre carte graphique [[:Amd-ati]].\\ | ||
- | Cette commande, associée à une ou plusieurs options permettra ainsi de configurer le fichier **/etc/X11/xorg.conf** et ainsi régler votre [[:xorg|serveur X]]. | ||
- | |||
- | <note>Le pendant graphique de cette commande est accessible depuis le panneau de contrôle [[:Catalyst]].</note> | ||
- | |||
- | <note important>__**Avant**__ d'appliquer la moindre commande, faites une [[:tutoriel:comment_sauver_et_restaurer_un_fichier|sauvegarde]] dur fichier **/etc/X11/xorg.conf**</note> | ||
- | |||
- | ===== Pré-requis ===== | ||
- | * Disposer des [[:sudo|droits d'administration]] | ||
- | |||
- | ===== Les options ===== | ||
- | |||
- | Pour afficher la liste des options tapez dans un [[:terminal]] la [[:commande_shell|commande]] suivante : | ||
- | <code>aticonfig</code> | ||
- | qui devrait répondre | ||
- | <code> | ||
- | Usage: aticonfig [OPTION] ... | ||
- | Parses an existing X-Server configuration file and modifies it to | ||
- | operate with ATI products. | ||
- | The following command-line options can be invoked as parameters: (...)</code> | ||
- | |||
- | ==== Configuration initiale nécessaire et suffisante du pilote ATI ==== | ||
- | |||
- | Les options : | ||
- | |||
- | <code>--initial | ||
- | Generate a default ATI device section in the configuration | ||
- | file which is capable of loading the fglrx driver. | ||
- | |||
- | --initial=dual-head | ||
- | Same as '--initial' but generate a basic dual head | ||
- | configuration file.</code> | ||
- | |||
- | Exemple la [[:commande_shell|commande]] | ||
- | <code>sudo aticonfig --initial=dual-head</code> met en place une config Dual Screen. Voilà, vous avez compris. Même chose pour la suite. | ||
- | |||
- | Note : pour les adeptes du vrai Dual Screen FIXME **c'est à dire ?**, lancez plutôt : | ||
- | <code>sudo aticonfig --dtop=horizontal --overlay-on=1</code> | ||
- | Cette commande est spécifiée par Ati en guise d'exemple en bas de page (Big Desktop FIXME ?)\\ | ||
- | Pour que vous puissiez voir les effets, il vous faut [[:tutoriel:comment_redemarrer_le_serveur_graphique|redémarrer le serveur X]] ou redémarrer votre ordinateur. | ||
- | |||
- | ==== TV Options ==== | ||
- | <code>--tvf, --tv-format-type=STRING | ||
- | Change the TV signal format. STRING can be one of: | ||
- | NTSC-M | ||
- | NTSC-JPN | ||
- | PAL-B | ||
- | PAL-D | ||
- | PAL-G | ||
- | PAL-H | ||
- | PAL-I | ||
- | PAL-K | ||
- | PAL-K1 | ||
- | PAL-L | ||
- | PAL-M | ||
- | PAL-N | ||
- | PAL-CN | ||
- | PAL-SCART</code> | ||
- | Permet de choisir le standard télé en fonction du pays. | ||
- | |||
- | <code> | ||
- | PAL-B : en Belgique, Danmark, Finland, Allemagne, | ||
- | Guinée, Hong Kong, Inde, Indonesie, | ||
- | Italie, Malaysie, Les Pays Bas, Norvège, | ||
- | Portugal, Singapoure, Espagne, Suède, | ||
- | et Suisse | ||
- | PAL-D : en Chine and Corée du Nord | ||
- | PAL-G : au Danmark, Finland, Allemagne, Italie, | ||
- | Malaysie, Les Pays Bas, Norvège, Portugal, | ||
- | Espagne, Suède, et Suisse | ||
- | PAL-H : en Belgique | ||
- | PAL-I : à Hong Kong et au Royaume Uni | ||
- | PAL-K1 : en Guinée | ||
- | PAL-M : au Brézil | ||
- | PAL-N : en France, Paraguay, et Uruguay | ||
- | PAL-NC : en Argentine | ||
- | NTSC-J : au Japan | ||
- | NTSC-M : au Canada, Chili, Colombie, Costa Rica, | ||
- | Ecuador, Haiti, Honduras, Mexique, Panama, | ||
- | Porto Rico, Corée du Sud, Taiwan, USA, | ||
- | et Venezuela</code> | ||
- | |||
- | <code>--tvs, --tv-standard-type=STRING | ||
- | Change the TV standard for TV output. STRING can be one of: | ||
- | VIDEO | ||
- | SCART | ||
- | YUV | ||
- | </code> | ||
- | |||
- | La fonction overscan qui permet un plein écran ou surbalayage de l'écran pour ôter les bandes noires sur votre tv: | ||
- | <code> | ||
- | --tv-overscan={on|off} | ||
- | Enable or disable overscan mode for TVout | ||
- | Note, not all tv-formats support overscan. Try to | ||
- | toggle overscan off before changing tv-format if | ||
- | and error occurs. | ||
- | </code> | ||
- | |||
- | Donne des infos sur votre tv. | ||
- | <code> | ||
- | --tv-info | ||
- | Print out the current tv geometry, tv format, and if the | ||
- | tv is physically connected. | ||
- | </code> | ||
- | |||
- | Options pour les cartes FireGL Workstation : | ||
- | <code> | ||
- | --app, --use-app-profile=STRING | ||
- | Change the application profile for a FireGL workstation board. | ||
- | STRING can be one of: | ||
- | default | ||
- | maya | ||
- | softimage-xsi | ||
- | softimage-3d | ||
- | houdini4.0 | ||
- | houdini5.0 | ||
- | houdini5.5</code> | ||
- | |||
- | Cette commande permet d'optimiser les paramètres de votre machine pour des applications 3d spécifiques. Tous les logiciels qui suivent sont des logiciels de 3d. Maya par exemple à servi pour l'épisode 3 de Star Wars\\ | ||
- | Exemple : | ||
- | <code>sudo aticonfig --use-app-profile=maya</code> | ||
- | |||
- | <code> | ||
- | --dw, --disable-workstation=STRING | ||
- | Disable a FireGL workstation board feature. STRING can be one of: | ||
- | all | ||
- | timmo | ||
- | timmo-extreme</code> | ||
- | |||
- | |||
- | ==== FSAA Options ==== | ||
- | <code> | ||
- | --fsaa={on|off} | ||
- | Enable/disable full scene anti-aliasing. Enable this option | ||
- | to enhance photo-realism in 3D rendering. Disable it to get | ||
- | the most accurate 3D image. | ||
- | </code> | ||
- | |||
- | Cette option permet d'activer l'[[:catalyst#anticrenelage_ou_antialiasing|anti-aliasing]] des cartes 3d.\\ | ||
- | Dans les faits, la carte graphique lisse les contours des objets 3d pour permettre de diminuer l'effet de crénelage | ||
- | |||
- | <code>--fs, --fsaa-samples={off,0,2,4,6} | ||
- | Set the number of FSAA samples per pixel or 2, 4, 6. off is | ||
- | the same as setting 0 samples. | ||
- | </code> | ||
- | |||
- | Cette option détermine le taux de lissage que vous voulez appliquer à votre objets 3d: plus le chiffre est grand, plus l'image sera douce, mais plus les ressources demandées à la carte graphique augmentent.\\ | ||
- | **Petites cartes s'abstenir...** | ||
- | |||
- | <code> | ||
- | --fsg, --fsaa-gamma={on|off} | ||
- | Enable/disable FSAA gamma. | ||
- | </code> | ||
- | |||
- | Activer le gamma permet de corriger un défaut de beaucoup de moniteurs.\\ | ||
- | Il est conseillé de l'activer, ou tout au moins de le tester, surtout si vous êtes équipé d'un écran [[wpfr>Tube_cathodique|CRT]].\\ | ||
- | Si vous êtes infographiste, ou comptez le devenir, il est important de connaître, ce qu'est [[http://www.profil-couleur.com/pp/204-gamma-ecran.php|une courbe de gamma]]. | ||
- | |||
- | <code> | ||
- | --fmsp, --fsaa-ms-positions=x0,y0,x1,y1,x2,y2,x3,y3,x4,y4,x5,y5 | ||
- | Change the FSAA Multi-Sample Positions for x0,y0 to x5,y5. You must | ||
- | specify exactly 12 real number values separated by commas. | ||
- | </code> | ||
- | |||
- | |||
- | |||
- | ==== Options relatives aux écrans ==== | ||
- | |||
- | <code> | ||
- | --ovt, --overlay-type=STRING | ||
- | Change the overlay for the X server. STRING can be one of: | ||
- | opengl | ||
- | Xv | ||
- | disable | ||
- | |||
- | --ovon, --overlay-on={0|1} | ||
- | Choose which head the hardware overlay should be visible on. The hardware overlay can be used for either OpenGL, video, pseudo-color or stereo. | ||
- | |||
- | --lcd, --lcd-mode=STRING | ||
- | |||
- | Change the LCD mode. STRING can be one of: | ||
- | center | ||
- | full | ||
- | </code> | ||
- | |||
- | <code> | ||
- | aticonfig --desktop-setup= horizontal | ||
- | --dtop, --desktop-setup=STRING | ||
- | |||
- | Change the desktop setup for multiple display adapters. | ||
- | STRING can be one of: | ||
- | |||
- | single 1 screen, second dark | ||
- | mirror 2 screens - same content, identical refresh rate/resolution | ||
- | clone 2 screens - same content, allows for different refresh rates/resolutions | ||
- | horizontal 2 screens - one framebuffer, screen 1 right of screen 0 | ||
- | horizontal,reverse 2 screens - one framebuffer, screen 1 left of screen 0 | ||
- | vertical 2 screens - one framebuffer, screen 1 above of screen 0 | ||
- | vertical,reverse 2 screens - one framebuffer, screen 1 below of screen 0 | ||
- | |||
- | Note: This option is not valid if '--initial=dual-head' is specified.</code> | ||
- | |||
- | Permet de gérer l'organisation des écrans les uns par rapport aux autres. | ||
- | |||
- | <code> | ||
- | --vs, --sync-vsync={on|off} | ||
- | Enable/disable sync buffer swaps with vsync. | ||
- | Enable this option to prevent tearing during 3D rendering. | ||
- | </code> | ||
- | |||
- | Si vous possédez un écran LCD, évite l'effet d'escalier dans les jeux de type FPS. | ||
- | |||
- | <code> | ||
- | --psc, --pseudo-color={on|off} | ||
- | Enable/disable pseudo-color visuals. Enable this option | ||
- | to get 16-bit color support. | ||
- | |||
- | --stereo={on|off} | ||
- | Enable/disable quad-buffer stereo support. | ||
- | Enable this option only for using applications that support the use of hardware 3D shutter glasses. | ||
- | |||
- | --ss, --stereo-sync={on|off} | ||
- | Enable/disable quad-buffer stereo sync. Enable this option to get 3D glasses to synchronize with the infrared transmitter. | ||
- | |||
- | --resolution=W1xH1,W2xH2,W3xH3,... | ||
- | Set the modes for the first screen. You may specify several resolutions separated by commas. | ||
- | |||
- | --hsync=LOW-HIGH | ||
- | Change the horizontal sync range of the first monitor. | ||
- | Make sure you know the capabilities of your monitor before changing this option. | ||
- | |||
- | --vrefresh=LOW-HIGH | ||
- | Change the vertical refresh range of the first monitor. | ||
- | Make sure you know the capabilities of your monitor before changing this option. | ||
- | |||
- | --resolution2=W1xH1,W2xH2,W3xH3,... | ||
- | Change the modes for the second screen for dual head. | ||
- | You may specify several resolutions separated by commas. | ||
- | Note: The secondary screen must exist. | ||
- | |||
- | --hsync2=LOW-HIGH | ||
- | Change the horizontal sync range of the second display. | ||
- | Make sure you know the capabilities of your monitor before changing this option. | ||
- | |||
- | --vrefresh2=LOW-HIGH | ||
- | Change the vertical refresh range of the second display. | ||
- | Make sure you know the capabilities of your monitor before changing this option. | ||
- | |||
- | --mode2=W1xH1,W2XH2,W3xH3,... | ||
- | Change the modes for the second display. | ||
- | You may specify several resolutions separated by commas. | ||
- | Only valid for clone and big desktop settings. | ||
- | </code> | ||
- | <code> | ||
- | --screen-layout={left|right|above|below} | ||
- | Set the secondary screen position for dual head. | ||
- | |||
- | </code> | ||
- | |||
- | Change l'ordre de disposition des écrans | ||
- | |||
- | <code> | ||
- | --screen-overlap=NUM | ||
- | Set the screen overlap region in big desktop mode to be NUM pixels. | ||
- | </code> | ||
- | L'oververlapping permet, quand on veut maximiser un fenêtre de la répartir sur les deux écrans. Il est déconseillé de l'activer car cela pose des problèmes pour l'affichage des vidéos plein écran. | ||
- | |||
- | <code>--force-monitor=STRING[,STRING...] | ||
- | |||
- | Describe all displays that are to be enabled and/or disabled regardless of physical connection. | ||
- | STRING can be one or more of the following set, separated by commas: | ||
- | crt1 | ||
- | crt2 | ||
- | lvds | ||
- | tv | ||
- | tmds1 | ||
- | tmds2 | ||
- | tmds2i | ||
- | nocrt1 | ||
- | nocrt2 | ||
- | nolvds | ||
- | notv | ||
- | notmds1 | ||
- | notmds2 | ||
- | notmds2i | ||
- | </code> | ||
- | Permet d'activer ou désactiver les différentes connexions physiques, crt1 et crt2 pour activer les sorties écrans 1 et 2, nocrt1 et nocrt2 pour désactiver les sorties écrans 1 et 2, tv pour la sortie tv, etc. | ||
- | |||
- | |||
- | ==== Powerplay Options ==== | ||
- | |||
- | Option disponible uniquement sur les modèles //mobility//. Elle permet de régler les différents modes de la carte afin de baisser ou d'augmenter sa fréquence.\\ | ||
- | Exemple, sur //mobility x1800// il existe trois modes : //eco, defaut// et //perf// qui font respectivement comme résultat avec [[:catalyst#glxgears|glxgears]] : 3000 / 5500 / 8500. | ||
- | |||
- | <code> | ||
- | --lsp, --list-powerstates | ||
- | Print information about power states and exit. | ||
- | |||
- | --set-powerstate=NUMBER | ||
- | Set a power state listed by --list-powerstates. | ||
- | </code> | ||
- | |||
- | ==== Advanced Options ==== | ||
- | |||
- | <code> | ||
- | --tls={on|off} | ||
- | Enable/disable fast thread local storage. | ||
- | Disable this option when virtual machines or | ||
- | WineX fail to work properly. | ||
- | |||
- | --sb, --signal-block={on|off} | ||
- | |||
- | Enable/disable signal blocking. Disable this option when debugging a | ||
- | multi-threaded OpenGL application. | ||
- | |||
- | --iagp, --internal-agp={on|off} | ||
- | |||
- | Enable/disable internal AGP gart. Enable this option to use the ATI | ||
- | AGP GART module. Disable it to use the module included with the Linux | ||
- | kernel. Changing this option may help resolve display-related issues. | ||
- | |||
- | --agpl, --agp-locked-userpages={on|off} | ||
- | |||
- | Enable/disable AGP locked user pages. Disable this option if the system | ||
- | hangs when running fgl_glxgears. | ||
- | |||
- | --gcpu, --generic-cpu={on|off} | ||
- | |||
- | Enable/disable generic CPU. Use this option if the CPU is being | ||
- | reported improperly. For example: If you have an AMD cpu that is | ||
- | being reported as Intel. | ||
- | </code> | ||
- | |||
- | ==== Miscellaneous Options ==== | ||
- | |||
- | <code> | ||
- | -v, --verbose | ||
- | Show what aticonfig is doing. | ||
- | |||
- | -q, --quiet | ||
- | Disable all information output except for errors. | ||
- | |||
- | --effective={now,startup} | ||
- | Choose when the requested changes should take effect. | ||
- | |||
- | now: Immediately. This change will affect the running X | ||
- | session if applicable. Only 'set-powerstate' and | ||
- | 'overlay-on' are applicable for now. | ||
- | startup: On future X server startups. This change will modify the | ||
- | X server configuration file if applicable. | ||
- | The default is 'now,startup', i.e., do both as applicable. | ||
- | |||
- | -i, --input=FILE | ||
- | Select a FILE to input as the configuration file. Set FILE to '-' to | ||
- | pipe from standard input. Without this option, aticonfig will search | ||
- | /etc/X11 for the default configuration file. | ||
- | |||
- | -o, --output=FILE | ||
- | Select a FILE to output the new configuration file to. Set FILE to '-' | ||
- | to print to standard output. Without this option, aticonfig will | ||
- | replace the input file with the newly generated file. | ||
- | |||
- | -h, --help | ||
- | Display this help screen. | ||
- | |||
- | -f, --force | ||
- | Only valid with 'initial' option. Force aticonfig to generate default | ||
- | Monitor, Device, and Screen sections even if the original configuration | ||
- | file has invalid settings in these sections. | ||
- | |||
- | </code> | ||
- | |||
- | |||
- | ===== Les exemples ===== | ||
- | |||
- | <code> | ||
- | 1. Setting up fglrx for the first time. | ||
- | |||
- | Single head : aticonfig --initial | ||
- | --input=/etc/X11/xorg.conf | ||
- | ---- | ||
- | Dual head : aticonfig --initial=dual-head --screen-layout=above | ||
- | This command will generate a dual head configuration | ||
- | file with the second screen located above the first | ||
- | screen. | ||
- | 2. Setting up big desktop to horizontal and set overlay on secondary display. | ||
- | aticonfig --dtop=horizontal --overlay-on=1 | ||
- | |||
- | 3. Setting up modes for primary display. | ||
- | aticonfig --resolution=1600x1200,1280x1024,1024x768 | ||
- | |||
- | 4. Force primary CRT on and TV-out off. | ||
- | aticonfig --force-monitor=crt1,notv | ||
- | </code> | ||
- | |||
- | ===== Liens ===== | ||
- | * Source de cette page: l'aide d' ''aticonfig'' | ||
- | * [[http://support.ati.com|Contacter Ati]] pour rapporter d'éventuels bugs | ||
- | * [[:amd-ati]] | ||
- | |||
- | ---- | ||
- | //Contributeurs : [[:utilisateurs:kao_chen]], [[:utilisateurs:urss]]// |