Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
avermedia_avertv_dvb-t_usb2 [Le 20/02/2017, 16:29]
37.187.147.158 obsolète
— (Version actuelle)
Ligne 1: Ligne 1:
-{{tag>​Dapper matériel télécommande carte_tv tnt vétuste}} 
  
----- 
- 
-====== Carte TV : Avermedia AverTV DVB-T USB 2.0 (A800) ====== 
- 
-{{materiel:​avertvdvbtusb2_b.jpg|}} 
- 
- 
-Ce wiki s'​intéresse à l'​installation de la télécommande de la carte tv. 
- 
- 
- 
- 
-===== Installation ===== 
- 
-Il faut d'​abord installer lirc : 
-  sudo apt-get install lirc lirc-x 
- 
-Puis rechercher le fichier correspondant à la télécommande parmi les /​dev/​input/​eventX (X étant le nombre à changer) :  
-  sudo cat /​dev/​input/​event2 
-  {� 
-  E�����{� 
-  E� 
- 
-Vous devez avoir des caractères bizarres lorsque vous appuyez sur des touches de votre télécommande. 
- 
- 
-Une fois que vous l'avez identifier, il faut modifier le fichier /​etc/​lirc/​hardware.conf de la façon suivante : 
-  sudo gedit /​etc/​lirc/​hardware.conf 
-Mon fichier : 
-<​file>​ 
-# /​etc/​lirc/​hardware.conf 
-# 
-# Arguments which will be used when launching lircd 
-LIRCD_ARGS=""​ 
-  ​ 
-#Don't start lircmd even if there seems to be a good config file 
-#​START_LIRCMD=false 
- 
-#Try to load appropriate kernel modules 
-LOAD_MODULES=false 
- 
-# Run "lircd --driver=help"​ for a list of supported drivers. 
-DRIVER="​dev/​input"​ 
-# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be 
-# automatically used instead 
-DEVICE="/​dev/​input/​event2"​ 
-MODULES=""​ 
- 
-# Default configuration files for your hardware if any 
-LIRCD_CONF=""​ 
-LIRCMD_CONF=""​ 
-</​file>​ 
- 
- 
-Ensuite, il faut entrer l'​association entre la touche pressée et  le code reçu dans le fichier /​etc/​lirc/​lircd.conf 
-  sudo gedit /​etc/​lirc/​lircd.conf & 
- 
-Mon fichier : 
-<​file>​ 
-# 
-# this config file was created by using lirc-0.8 on Thu Sept 14 2006 
-# 
-# contributed by elturisto 
-# 
-# brand: AVerMedia 
-# model no. of remote control: RM-FP 
-# devices being controlled by this remote: AVerMedia DVB-T USB2.0 (A800) 
-# 
- 
-begin remote 
- 
-  name  rmfp 
-  bits           32 
-  flags SPACE_ENC|CONST_LENGTH 
-  eps            30 
-  aeps          100 
- 
-  header ​      ​8967 ​ 4524 
-  one           ​565 ​ 1682 
-  zero          565   559 
-  ptrail ​       561 
-  repeat ​      ​8968 ​ 2276 
-  gap          107905 
-  toggle_bit ​     0 
- 
- 
-      begin codes 
-          power                    0x00010074 
-          source ​                  ​0x00010094 
-          1                        0x00010002 
-          2                        0x00010003 
-          3                        0x00010004 
-          4                        0x00010005 
-          5                        0x00010006 
-          6                        0x00010007 
-          7                        0x00010008 
-          8                        0x00010009 
-          9                        0x0001000a 
-          0                        0x0001000b 
-          display ​                 0x00010069 
-          snapshot ​                ​0x00010095 
-          chrtn                    0x0001006a 
-          chprev ​                  ​0x000100ca 
-          chup                     ​0x00010192 
-          chdown ​                  ​0x00010193 
-          voldown ​                 0x00010072 
-          volup                    0x00010073 
-          fullscreen ​              ​0x00010174 
-          mute                     ​0x00010071 
-          audio                    0x00010188 
-          record ​                  ​0x000100a7 
-          play                     ​0x000100cf 
-          stop                     ​0x00010080 
-          pause                    0x000100a4 
-          rewind ​                  ​0x0001009e 
-          forward ​                 0x0001009f 
-          teletext ​                ​0x00010184 
-          last                     ​0x00010194 
-          next                     ​0x00010195 
-          epg                      0x0001016d 
-          menu                     ​0x0001008b 
-      end codes 
- 
-end remote 
-</​file>​ 
- 
-Il faut relancer lirc avec ces nouvelles configurations : 
- 
-  sudo dpkg-reconfigure lirc 
- 
- 
-Normalement,​ si tout fonctionne, avec irw vous devriez voir les touches sur votre terminal : 
-  $ sudo irw 
-  0000000000010005 00 4 rmfp 
-  0000000000010006 00 5 rmfp 
-  000000000001000a 00 9 rmfp 
-  000000000001000b 00 0 rmfp 
-  0000000000010192 00 chup rmfp 
-  0000000000010072 00 voldown rmfp 
-  0000000000010073 00 volup rmfp 
- 
- 
-Si ça fonctionne : c'est quasiment terminé ! Il reste à personnaliser vos touches selon vos besoins. 
- 
-Pour ma part, j'ai créé un fichier ~/.lircrc et j'ai mis des raccourcis pour Kaffeine et Amarok ainsi que la reconnaissance des chiffres : 
- 
-  gedit ~/.lircrc 
- 
-<​file>​ 
-#amarok 
-begin 
-        prog = irexec 
-        button = menu 
-        config = amarok 
-end 
- 
-begin 
-        prog = irexec 
-        button = power 
-        config = dcop amarok MainApplication-Interface quit 
-end 
- 
-begin 
-    prog = irexec 
-    button = play 
-    config = dcop amarok player play 
-end 
- 
-begin 
-        prog = irexec 
-        button = forward 
-        config = dcop amarok player seekRelative 10 
-end 
- 
-begin 
-        prog = irexec 
-        button = rewind 
-        config = dcop amarok player seekRelative -5 
-end 
- 
-begin 
-        prog = irexec 
-        button = pause 
-        config = dcop amarok player pause 
-end 
- 
-begin 
-        prog = irexec 
-        button = stop 
-        config = dcop amarok player stop 
-end 
- 
-begin 
-        prog = irexec 
-        button = next 
-        config = dcop amarok player next 
-end 
- 
-begin 
-        prog = irexec 
-        button = last 
-        config = dcop amarok player prev 
-end 
- 
-begin 
-        prog = irexec 
-        button = chup 
-        config = dcop amarok player next 
-end 
- 
-begin 
-        prog = irexec 
-        button = chdown 
-        config = dcop amarok player prev 
-end 
- 
-begin 
-        prog = irexec 
-        button = volup 
-        config = dcop amarok player volumeUp 
-end 
- 
-begin 
-        prog = irexec 
-        button = mute 
-        config = dcop amarok player mute 
-end 
- 
-begin 
-        prog = irexec 
-        button = voldown 
-        config = dcop amarok player volumeDown 
-end 
- 
-begin 
-        prog = irexec 
-        button = epg 
-        config = dcop amarok playlist togglePlaylist 
-end 
- 
-begin 
-        prog = irexec 
-        button = chrtn 
-        config = toggleRandomAmarok 
-end 
- 
- 
-begin 
-        prog = irexec 
-        button = fullscreen 
-        config = dcop amarok player showOSD ​ 
-end 
- 
-#kaffeine 
-begin 
-        prog = irexec 
-        button = source 
-        config = kaffeine 
-end 
- 
-begin 
-        prog = irexec 
-        button = play 
-        config = dcop kaffeine KaffeineIface play 
-end 
- 
-begin 
-        prog = irexec 
-        button = pause 
-        config = dcop kaffeine KaffeineIface pause 
-end 
- 
-begin 
-        prog = irexec 
-        button = stop 
-        config = dcop kaffeine KaffeineIface stop 
-end 
- 
-begin 
-        prog = irexec 
-        button = forward 
-        config = dcop kaffeine KaffeineIface posPlus 
-end 
- 
-begin 
-        prog = irexec 
-        button = rewind 
-        config = dcop kaffeine KaffeineIface posMinus 
-end 
- 
-begin 
-        prog = irexec 
-        button = next 
-        config = dcop kaffeine KaffeineIface next 
-end 
- 
-begin 
-        prog = irexec 
-        button = last 
-        config = dcop kaffeine KaffeineIface previous 
-end 
- 
-begin 
-        prog = irexec 
-        button = chup 
-        config = dcop kaffeine KaffeineIface next 
-end 
- 
-begin 
-        prog = irexec 
-        button = chdown 
-        config = dcop kaffeine KaffeineIface previous 
-end 
- 
-begin 
-        prog = irexec 
-        button = power 
-        config = dcop kaffeine KaffeineIface quit 
-end 
- 
-begin 
-        prog = irexec 
-        button = volup 
-        config = dcop kaffeine KaffeineIface volUp 
-end 
- 
-begin 
-        prog = irexec 
-        button = mute 
-        config = dcop kaffeine KaffeineIface mute 
-end 
- 
-begin 
-        prog = irexec 
-        button = voldown 
-        config = dcop kaffeine KaffeineIface volDown 
-end 
- 
-begin 
-        prog = irexec 
-        button = fullscreen 
-        config = dcop kaffeine KaffeineIface fullscreen 
-end 
- 
-# Chiffres 
-begin 
-        prog = irxevent 
-        button = 1    
-        config = Key SHIFT-1 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 2    
-        config = Key SHIFT-2 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 3  ​ 
-        config = Key SHIFT-3 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 4  ​ 
-        config = Key SHIFT-4 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 5    
-        config = Key SHIFT-5 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 6    
-        config = Key SHIFT-6 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 7    
-        config = Key SHIFT-7 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 8    
-        config = Key SHIFT-8 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 9    
-        config = Key SHIFT-9 CurrentWindow 
-end 
- 
-begin 
-        prog = irxevent 
-        button = 0  ​ 
-        config = Key SHIFT-0 CurrentWindow 
-end 
-</​file>​ 
- 
- 
-Vous pouvez utiliser des interfaces graphiques avec irkick (il faut aussi installer kdelirc). 
- 
-Pour finir, il faut ajouter au démarrage : 
- 
-- Sur gnome : Système-Préférences-Sessions-Programmes au démarrage : **irxevent** puis **irexec** 
- 
-- Sur kde :  
-  kate ~/​.kde/​Autostart/​irexec 
-  #!/bin/bash 
-  irexec 
- 
-  kate ~/​.kde/​Autostart/​irxevent 
-  #!/bin/bash 
-  irxevent 
- 
-  chmod u+x ~/​.kde/​Autostart/​irexec ~/​.kde/​Autostart/​irxevent 
- 
----- 
-//​Contributeurs : [[utilisateurs:​elturisto]]//​ 
-// Basé sur [[http://​forum.ubuntu-fr.org/​viewtopic.php?​id=44719&​p=1|ce forum]] //99