Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
compaq_presario_r3000 [Le 27/04/2008, 21:35]
anod1 Mise à jour pour hardy
— (Version actuelle)
Ligne 1: Ligne 1:
-{{tag>​portable compaq}} 
  
----- 
- 
- 
- 
- 
- 
-======Compaq Presario séries R3000 ====== 
- 
-Cette page s'​adresse aux possesseurs d'un **Compaq Presario série R3000** (celui testé étant un R3332). 
-  
- 
-**Note importante :** sous Gutsy, tout est parfaitement fonctionnel grâce aux drivers propriétaires suggérés juste après l'​installation : Wifi, modem RTC, écran.... 
- 
- 
-====== ​ 
-**NOTE très importante** 
- 
- ​====== 
- : 
-Sous Gutsy, la carte graphique ne se configure pas d'elle même . 
-Les pilotes sont introuvables, ​ 
-la 3D ne marche pas. Toute rame. Le gestionnaire le pilotes propriétaire refuse de demarrer. 
- 
-=====Prérequis===== 
- 
-  * Fonction [[:sudo]] activée (configuration par défaut ; sinon, voir //ajout sudo utilisateur//​) ; 
-  * Une connexion internet configurée et activée **si possible** (si non, voir la section : accueil Modem RTC et ADSL). 
- 
- 
-=====Compaq Presario R3000 avec carte graphique ATI Radeon 9000 IGP===== 
- 
-Utilisez le driver libre [[:​Radeon]]. 
- 
-L'​installation ne pose aucun soucis pour les versions inférieures à Hardy. Cependant ne pas utiliser [[:Envy]] qui ne fonctionne pas avec cette configuration. 
- 
-<​note>​ 
-Pour **Hardy**, le pilote libre est blacklisté dans compiz sous HARDY 8.04 
-CF [[https://​bugs.launchpad.net/​ubuntu/​+source/​compiz/​+bug/​201330]] 
-Ajoutez "​SKIP_CHECKS=yes"​ soit à /​etc/​xdg/​compiz/​compiz-manager,​ soit à ~/​.config/​compiz/​compiz-manager pour qu'il fonctionne normalement sous HARDY 
-</​note>​ 
- 
- 
-===== WiFi ===== 
- 
-==== Pour Dapper et Edgy ==== 
- 
- 
-Utilisez [[:​ndiswrapper]]. 
- 
-La configuration de la carte se fera alors via le menu //Système -> Administration -> Réseau//. 
- 
- 
- 
- 
-==== Pour Feisty ==== 
- 
-C'est beaucoup plus simple : [[:​tutoriel:​comment_installer_un_paquet|installez le paquet]] **bcm43xx-fwcutter**. 
- 
-<​note>​Depuis Dapper, un module Wifi « bcm43xx » est chargé et peut détecter les points d'​accès disponibles sans pour autant accrocher le signal. Dans ce cas, l'​installation décrite ci-dessus peut être nécessaire en pensant à //​blacklister//​ le module « bcm43xx » dans le fichier **/​etc/​modprobe.d/​blacklist** en ajoutant la ligne : 
-<​file>​ 
-blacklist bcm43xx 
-</​file>​ 
-</​note>​ 
- 
-Voici le fichier **/​etc/​xorg.conf** de [[:​utilisateurs:​anod1]] qui a l'​accélération graphique fonctionnelle : 
- 
-<​file>​ 
-# /​etc/​X11/​xorg.conf (xorg X Window System server configuration file) 
-# 
-# This file was generated by dexconf, the Debian X Configuration tool, using 
-# values from the debconf database. 
-# 
-# Edit this file with caution, and see the xorg.conf(5) manual page. 
-# (Type "man xorg.conf"​ at the shell prompt.) 
-# 
-# This file is automatically updated on xserver-xorg package upgrades *only* 
-# if it has not been modified since the last upgrade of the xserver-xorg 
-# package. 
-# 
-# If you have edited this file but would like it to be automatically updated 
-# again, run the following command: 
-#   sudo dpkg-reconfigure -phigh xserver-xorg 
- 
-Section "​Files"​ 
- FontPath "/​usr/​share/​fonts/​X11/​misc"​ 
- FontPath "/​usr/​share/​fonts/​X11/​cyrillic"​ 
- FontPath "/​usr/​share/​fonts/​X11/​100dpi/:​unscaled"​ 
- FontPath "/​usr/​share/​fonts/​X11/​75dpi/:​unscaled"​ 
- FontPath "/​usr/​share/​fonts/​X11/​Type1"​ 
- FontPath "/​usr/​share/​fonts/​X11/​100dpi"​ 
- FontPath "/​usr/​share/​fonts/​X11/​75dpi"​ 
- # path to defoma fonts 
- FontPath "/​var/​lib/​defoma/​x-ttcidfont-conf.d/​dirs/​TrueType"​ 
-EndSection 
- 
-Section "​Module"​ 
- Load "​i2c"​ 
- Load "​bitmap"​ 
- Load "​ddc"​ 
- Load "​dri"​ 
- Load "​extmod"​ 
- Load "​freetype"​ 
- Load "​glx"​ 
- Load "​int10"​ 
- Load "​vbe"​ 
-EndSection 
- 
-Section "​InputDevice"​ 
- Identifier "​Generic Keyboard"​ 
- Driver "​kbd"​ 
- Option "​CoreKeyboard"​ 
- Option "​XkbRules"​ "​xorg"​ 
- Option "​XkbModel"​ "​pc105"​ 
- Option "​XkbLayout"​ "​fr"​ 
- Option "​XkbVariant"​ "​oss"​ 
-EndSection 
- 
-Section "​InputDevice"​ 
- Identifier "​Configured Mouse" 
- Driver "​mouse"​ 
- Option "​CorePointer"​ 
- Option "​Device"​ "/​dev/​input/​mice"​ 
- Option "​Protocol"​ "​ImPS/​2"​ 
- Option "​ZAxisMapping"​ "​4 5" 
- Option "​Emulate3Buttons"​ "​true"​ 
-EndSection 
- 
-Section "​InputDevice"​ 
- Identifier "​Synaptics Touchpad"​ 
- Driver "​synaptics"​ 
- Option "​SendCoreEvents"​ "​true"​ 
- Option "​Device"​ "/​dev/​psaux"​ 
- Option "​Protocol"​ "​auto-dev"​ 
- Option "​HorizScrollDelta"​ "​0"​ 
-EndSection 
- 
-Section "​InputDevice"​ 
- Driver "​wacom"​ 
- Identifier "​stylus"​ 
- Option "​Device"​ "/​dev/​input/​wacom"​ 
- Option "​Type"​ "​stylus"​ 
- Option "​ForceDevice"​ "​ISDV4"​ #​ Tablet PC ONLY 
-EndSection 
- 
-Section "​InputDevice"​ 
- Driver "​wacom"​ 
- Identifier "​eraser"​ 
- Option "​Device"​ "/​dev/​input/​wacom"​ 
- Option "​Type"​ "​eraser"​ 
- Option "​ForceDevice"​ "​ISDV4"​ #​ Tablet PC ONLY 
-EndSection 
- 
-Section "​InputDevice"​ 
- Driver "​wacom"​ 
- Identifier "​cursor"​ 
- Option "​Device"​ "/​dev/​input/​wacom"​ 
- Option "​Type"​ "​cursor"​ 
- Option "​ForceDevice"​ "​ISDV4"​ #​ Tablet PC ONLY 
-EndSection 
- 
-Section "​Device"​ 
- Identifier "​ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]"​ 
- Driver "​ati"​ 
- BusID "​PCI:​1:​5:​0"​ 
-EndSection 
- 
-Section "​Monitor"​ 
- Identifier "​Écran générique"​ 
- Option "​DPMS"​ 
-EndSection 
- 
-Section "​Screen"​ 
- Identifier "​Default Screen"​ 
- Device "​ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]"​ 
- Monitor "​Écran générique"​ 
- DefaultDepth 24 
- SubSection "​Display"​ 
- Depth 1 
- Modes "​1280x800"​ 
- EndSubSection 
- SubSection "​Display"​ 
- Depth 4 
- Modes "​1280x800"​ 
- EndSubSection 
- SubSection "​Display"​ 
- Depth 8 
- Modes "​1280x800"​ 
- EndSubSection 
- SubSection "​Display"​ 
- Depth 15 
- Modes "​1280x800"​ 
- EndSubSection 
- SubSection "​Display"​ 
- Depth 16 
- Modes "​1280x800"​ 
- EndSubSection 
- SubSection "​Display"​ 
- Depth 24 
- Modes "​1280x800"​ 
- EndSubSection 
-EndSection 
- 
-Section "​ServerLayout"​ 
- Identifier "​Default Layout"​ 
- Screen "​Default Screen"​ 
- InputDevice "​Generic Keyboard"​ 
- InputDevice "​Configured Mouse" 
- InputDevice ​    "​stylus"​ "​SendCoreEvents"​ 
- InputDevice ​    "​cursor"​ "​SendCoreEvents"​ 
- InputDevice ​    "​eraser"​ "​SendCoreEvents"​ 
- InputDevice "​Synaptics Touchpad"​ 
-EndSection 
- 
-Section "​DRI"​ 
- Mode 0666 
-EndSection 
-</​file>​ 
- 
----- 
- 
-//​Contributeurs : [[utilisateurs:​Gui13]]//​ 
  • compaq_presario_r3000.1209324947.txt.gz
  • Dernière modification: Le 18/04/2011, 14:51
  • (modification externe)