Différences
Ci-dessous, les différences entre deux révisions de la page.
| Les deux révisions précédentes Révision précédente | |||
|
conky:conky_integre_sur_le_bureau [Le 17/11/2009, 14:16] YoBoY suppimée |
— (Version actuelle) | ||
|---|---|---|---|
| Ligne 1: | Ligne 1: | ||
| - | ==== Intégrée au fond d'écran ==== | ||
| - | <file> | ||
| - | # set to yes if you want Conky to be forked in the background | ||
| - | background yes | ||
| - | |||
| - | cpu_avg_samples 2 | ||
| - | net_avg_samples 2 | ||
| - | |||
| - | out_to_console no | ||
| - | |||
| - | # X font when Xft is disabled, you can pick one with program xfontsel | ||
| - | #font 7x12 | ||
| - | #font 6x10 | ||
| - | #font 7x13 | ||
| - | #font 8x13 | ||
| - | #font 7x12 | ||
| - | #font *mintsmild.se* | ||
| - | #font -*-*-*-*-*-*-34-*-*-*-*-*-*-* | ||
| - | #font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1 | ||
| - | |||
| - | # Use Xft? | ||
| - | use_xft yes | ||
| - | |||
| - | # Xft font when Xft is enabled | ||
| - | xftfont Bitstream Vera Sans Mono:size=8 | ||
| - | |||
| - | own_window_transparent yes | ||
| - | own_window_colour hotpink | ||
| - | # Text alpha when using Xft | ||
| - | xftalpha 0.8 | ||
| - | |||
| - | on_bottom yes | ||
| - | |||
| - | # mail spool | ||
| - | mail_spool $MAIL | ||
| - | |||
| - | # Update interval in seconds | ||
| - | update_interval 1 | ||
| - | # Create own window instead of using desktop (required in nautilus) | ||
| - | own_window no | ||
| - | |||
| - | # Use double buffering (reduces flicker, may not work for everyone) | ||
| - | double_buffer yes | ||
| - | |||
| - | # Minimum size of text area | ||
| - | #minimum_size 280 5 | ||
| - | #maximum_width 150 | ||
| - | |||
| - | # Draw shades? | ||
| - | draw_shades no | ||
| - | |||
| - | # Draw outlines? | ||
| - | draw_outline no | ||
| - | |||
| - | # Draw borders around text | ||
| - | draw_borders no | ||
| - | |||
| - | # Stippled borders? | ||
| - | stippled_borders 10 | ||
| - | |||
| - | # border margins | ||
| - | border_margin 4 | ||
| - | |||
| - | # border width | ||
| - | border_width 1 | ||
| - | |||
| - | # Default colors and also border colors | ||
| - | default_color white | ||
| - | default_shade_color white | ||
| - | default_outline_color white | ||
| - | |||
| - | # Text alignment, other possible values are commented | ||
| - | #alignment top_left | ||
| - | #minimum_size 10 10 | ||
| - | gap_x 13 | ||
| - | gap_y 34 | ||
| - | alignment top_right | ||
| - | #alignment bottom_left | ||
| - | #alignment bottom_right | ||
| - | |||
| - | # Gap between borders of screen and text | ||
| - | |||
| - | # Add spaces to keep things from moving about? This only affects certain objects. | ||
| - | use_spacer no | ||
| - | |||
| - | # Subtract file system buffers from used memory? | ||
| - | no_buffers yes | ||
| - | |||
| - | # set to yes if you want all text to be in uppercase | ||
| - | uppercase no | ||
| - | |||
| - | # boinc (seti) dir | ||
| - | # seti_dir /opt/seti | ||
| - | |||
| - | # Possible variables to be used: | ||
| - | # | ||
| - | # Variable Arguments Description | ||
| - | # acpiacadapter ACPI ac adapter state. | ||
| - | # acpifan ACPI fan state | ||
| - | # acpitemp ACPI temperature. | ||
| - | # adt746xcpu CPU temperature from therm_adt746x | ||
| - | # adt746xfan Fan speed from therm_adt746x | ||
| - | # battery (num) Remaining capasity in ACPI or APM | ||
| - | # battery. ACPI battery number can be | ||
| - | # given as argument (default is BAT0). | ||
| - | # buffers Amount of memory buffered | ||
| - | # cached Amount of memory cached | ||
| - | # color (color) Change drawing color to color | ||
| - | # cpu CPU usage in percents | ||
| - | # cpubar (height) Bar that shows CPU usage, height is | ||
| - | # bar's height in pixels | ||
| - | # downspeed net Download speed in kilobytes | ||
| - | # downspeedf net Download speed in kilobytes with one | ||
| - | # decimal | ||
| - | # exec shell command Executes a shell command and displays | ||
| - | # the output in torsmo. warning: this | ||
| - | # takes a lot more resources than other | ||
| - | # variables. I'd recommend coding wanted | ||
| - | # behaviour in C and posting a patch :-). | ||
| - | # execi interval, shell Same as exec but with specific interval. | ||
| - | # command Interval can't be less than | ||
| - | # update_interval in configuration. | ||
| - | # fs_bar (height), (fs) Bar that shows how much space is used on | ||
| - | # a file system. height is the height in | ||
| - | # pixels. fs is any file on that file | ||
| - | # system. | ||
| - | # fs_free (fs) Free space on a file system available | ||
| - | # for users. | ||
| - | # fs_free_perc (fs) Free percentage of space on a file | ||
| - | # system available for users. | ||
| - | # fs_size (fs) File system size | ||
| - | # fs_used (fs) File system used space | ||
| - | # hr (height) Horizontal line, height is the height in | ||
| - | # pixels | ||
| - | # i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev | ||
| - | # may be omitted if you have only one I2C | ||
| - | # device. type is either in (or vol) | ||
| - | # meaning voltage, fan meaning fan or temp | ||
| - | # meaning temperature. n is number of the | ||
| - | # sensor. See /sys/bus/i2c/devices/ on | ||
| - | # your local computer. | ||
| - | # kernel Kernel version | ||
| - | # loadavg (1), (2), (3) System load average, 1 is for past 1 | ||
| - | # minute, 2 for past 5 minutes and 3 for | ||
| - | # past 15 minutes. | ||
| - | # machine Machine, i686 for example | ||
| - | # mails Mail count in mail spool. You can use | ||
| - | # program like fetchmail to get mails from | ||
| - | # some server using your favourite | ||
| - | # protocol. See also new_mails. | ||
| - | # mem Amount of memory in use | ||
| - | # membar (height) Bar that shows amount of memory in use | ||
| - | # memmax Total amount of memory | ||
| - | # memperc Percentage of memory in use | ||
| - | # new_mails Unread mail count in mail spool. | ||
| - | # nodename Hostname | ||
| - | # outlinecolor (color) Change outline color | ||
| - | # pre_exec shell command Executes a shell command one time before | ||
| - | # torsmo displays anything and puts output | ||
| - | # as text. | ||
| - | # processes Total processes (sleeping and running) | ||
| - | # running_processes Running processes (not sleeping), | ||
| - | # requires Linux 2.6 | ||
| - | # shadecolor (color) Change shading color | ||
| - | # stippled_hr (space), Stippled (dashed) horizontal line | ||
| - | # (height) | ||
| - | # swapbar (height) Bar that shows amount of swap in use | ||
| - | # swap Amount of swap in use | ||
| - | # swapmax Total amount of swap | ||
| - | # swapperc Percentage of swap in use | ||
| - | # sysname System name, Linux for example | ||
| - | # time (format) Local time, see man strftime to get more | ||
| - | # information about format | ||
| - | # totaldown net Total download, overflows at 4 GB on | ||
| - | # Linux with 32-bit arch and there doesn't | ||
| - | # seem to be a way to know how many times | ||
| - | # it has already done that before torsmo | ||
| - | # has started. | ||
| - | # totalup net Total upload, this one too, may overflow | ||
| - | # updates Number of updates (for debugging) | ||
| - | # upspeed net Upload speed in kilobytes | ||
| - | # upspeedf net Upload speed in kilobytes with one | ||
| - | # decimal | ||
| - | |||
| - | # uptime Uptime | ||
| - | # uptime_short Uptime in a shorter format | ||
| - | # | ||
| - | # seti_prog Seti@home current progress | ||
| - | # seti_progbar (height) Seti@home current progress bar | ||
| - | # seti_credit Seti@hoome total user credit | ||
| - | |||
| - | |||
| - | # variable is given either in format $variable or in ${variable}. Latter | ||
| - | # allows characters right after the variable and must be used in network | ||
| - | # stuff because of an argument | ||
| - | #${font Dungeon:style=Bold:pixelsize=10}I can change the font as well | ||
| - | #${font Verdana:size=10}as many times as I choose | ||
| - | #${font Perry:size=10}Including UTF-8, | ||
| - | #${font Luxi Mono:size=10}justo como este texto que o google traduz fêz o português | ||
| - | # stuff after 'TEXT' will be formatted on screen | ||
| - | #${font Grunge:size=12}${time %a %b %d}${alignr -25}${time %k:%M} | ||
| - | |||
| - | TEXT | ||
| - | $nodename - $sysname $kernel on $machine | ||
| - | $stippled_hr | ||
| - | ${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg | ||
| - | ${color lightgrey}CPU Usage:${color #5000a0} ${cpu}% ${cpubar} | ||
| - | ${color black}${cpugraph 000000 5000a0} | ||
| - | ${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar | ||
| - | ${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar} | ||
| - | ${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes | ||
| - | $color$stippled_hr | ||
| - | ${color lightgrey}Networking: | ||
| - | Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed eth0} k/s | ||
| - | ${color black}${downspeedgraph eth0 32,150 ff0000 0000ff} $alignr${color black}${upspeedgraph eth0 32,150 0000ff ff0000} | ||
| - | ${color lightgrey}File systems: | ||
| - | / $color${fs_used /}/${fs_size /} ${fs_bar /} | ||
| - | ${color lightgrey}Temperatures: | ||
| - | CPU:$color ${i2c temp 2}C${color grey} - MB:$color ${i2c temp 1}C | ||
| - | ${font Dungeon:style=Bold:pixelsize=12}${color #88aadd}MPD: ${alignc}$mpd_artist - $mpd_title | ||
| - | ${color #88aadd}$mpd_bar | ||
| - | ${color #88aadd}${alignc}$mpd_status | ||
| - | ${color}Name PID CPU% MEM% | ||
| - | ${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} | ||
| - | ${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} | ||
| - | ${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} | ||
| - | ${color}Mem usage | ||
| - | ${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1} | ||
| - | ${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2} | ||
| - | ${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3} | ||
| - | |||
| - | ${color #FFFFFF} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1} | ||
| - | ${color #FFFFFF} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2} | ||
| - | ${color #FFFFFF} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3} | ||
| - | ${color #FFFFFF} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4} | ||
| - | </file> | ||